The Precautions of CNC Machining Tool Processing

What should you pay attention to when using CNC Machining tools for daily processing?

CNC Machining

1. CNC machine tool spindle adopts standard Φ6 (45 degree or 60 degree) diamond cutter. When loading the knife, the tool and spindle chuck and the nozzle must be cleaned to ensure that there is no foreign matter in the tool and spindle chuck. The spindle chuck must be regularly maintained (spray rustproof) Oil) to prevent rust, otherwise it will lead to shortened spindle life and poor processing results.

2. The spindle must keep the depth of the aluminum parts processed less than 0.1mm each time, otherwise it will exceed the rated cutting amount of the spindle, causing the spindle to be stuck or damaged.

3. The tool setting time must be correct. The high-gloss tool tip must be staggered to the edge of the processed product to prevent damage to the spindle and the tool. The amount of the lower tool must also be controlled to less than 0.1 mm. (The following figure shows that the tool is not correct or the machining cutting amount exceeds 0.1mm, causing the spindle to be damaged.