How to control the quality of Low volume production CNC machining parts

   Dongguan Zhuanxin Precision Hardware Co.,LTD is a professional low volume production CNC parts processing factory. We know how difficult it is for a product to go from raw materials to finished products, requiring a lot of labor and time. If a product with a poor size is sent to the customer due to the failure to detect it at the time of shipment, it will have a very big impact on both the customer and the manufacturer!

How to improve the qualified rate of shipments? This is the most basic guarantee for each manufacturer to customers, especially volume production CNC parts processing, the quantity is basically 10-1000 pieces, if it is to be repaired or redone, it will undoubtedly increase the cost and risk of both parties!

  Dongguan Zhuanxin Precision Hardware Co.,LTD has 15 years of experience in this industry. Simply share our experience and hope to help more people.

First, the finished product should be distinguished from the semi-finished product and the defective product, and the corresponding area should be divided to avoid mixing.

Secondly, it is necessary to be equipped with sophisticated testing equipment, such as CMM, spectrometer for raw material composition detection, secondary element, altimeter, micrometer, etc. One size meets the customer's drawing requirements; finally, all products after surface treatment need to be tested again and can only be shipped after the size is qualified.

Dongguan Zhuanxin Precision Hardware Co.,LTD has been strictly implementing, from the control of incoming materials, process control, and shipment control, all of them are 100% inspected. At present, our shipment pass rate is 99%.

Copyright http://www.zx-cncmachining.com/ (ZhuanXin Precision is a factory which specializing in 10-1000 CNC machining) Please indicate the source.